Heat resistant Belts
Heat resistant Belts
The carcass of the product selects cotton vanvas or EP canvas as skeleton material.Cover rubber and cushion rubber is styrene-butadiene rubber or chlorobutadiene that has god heat-resistant.The product can work under the temperature of 120oC.Heat-resistant conveyor belt widely used in industries of metallurgy,cement,coking,steel,and etc.
1.Specification as same as common conveyor belt
2.Heat-proof conveyor belts are categorized in three models
Model I:Able to withstand the test temperature of less than 100 ℃,codes T1
Model II: Able to withstand the test temperature of less than 125 ℃,codes T2
Model III: Able to withstand the test temperature of less than 175 ℃,codes T3
Model IV: Able to withstand the test temperature of less than 200 ℃,codes T4
The physical performance of cover rubber after heat-proof test comform to the specification in the table.
Adhesion of inter layer
More Products, please Check it:
Conveyor Belts Heat resistant Belts Heat Resistant Conveyor Belts
1.Specification as same as common conveyor belt
2.Heat-proof conveyor belts are categorized in three models
Model I:Able to withstand the test temperature of less than 100 ℃,codes T1
Model II: Able to withstand the test temperature of less than 125 ℃,codes T2
Model III: Able to withstand the test temperature of less than 175 ℃,codes T3
Model IV: Able to withstand the test temperature of less than 200 ℃,codes T4
The physical performance of cover rubber after heat-proof test comform to the specification in the table.
Items | Model | ||||
Model (I) | Model (II) | Model (III) | Model (IV) | ||
Variation range | |||||
Hardness | Difference after and beforeagingIRHD | ±20 | ±20 | ||
Maxmum after agingIRHD | 85 | ||||
Tensile strength | Decrease of performance variance rate%≤ | -25 | -30 | -40 | -40 |
Maxmum after aging Mpa | 12 | 10 | 5 | 5 | |
Elongation at break | Performance variance rate% | -50 | -55 | -55 | |
Maxmum after aging% | 200 | 180 | 180 |
Index | Between fabric layers | Between cover layer and belt core | |
Cover layer thickness 0.8-1.5mm |
Cover layer thickness 1.5mm |
||
Average of all test samples,N/mm,no less than | 3.0 | 2.2 | 2.6 |
The lowest data of all test samples,N/mm,no less than | 2.0 | 1.6 | 2.0 |
More Products, please Check it:
Conveyor Belts Heat resistant Belts Heat Resistant Conveyor Belts
Send Inquiry
If you have any enquiry about quotation or cooperation, please feel free to email us at sales@joytongda.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Related Products