You are here: Home » Technical Information
Conveyor belting system
Conveyor belting systemApr 29, 2019

the conveyor belting system can be bifurcated into two systems general material handling and bulk material handling. Both the entities are used with common differences such as general material handling conveyor...

How to correctly handle the belt deviation problem
How to correctly handle the belt deviation problemApr 29, 2019

During use, if there is deviation, to make the following examination to determine the cause, making adjustments。The conveyor belt running deviation often check the location and treatment methods are: Check the roller center line of the tra...

Why the conveyor belt longitudinal tear?
Why the conveyor belt longitudinal tear?Apr 29, 2019

(1), shock and vibration caused by fasteners loose and fall off, causing the coal falling pipe lining plate, guide plate falling. (2), the material is mixed with foreign body, the foreign body is hard, has edges and corners, the coal tube ja...

Four reasons for the vulcanizing joint tearing of the conveyor belt
Four reasons for the vulcanizing joint tearing of the conveyor beltApr 29, 2019

(1) to a small diameter, the bending stress of the conveyor belt is large. (2) the poor quality of the conveyor belt, especially over two times, the strength of the joint is obviously reduced, or when the canvas layer is cut, or cut, and the...